Table in the up position
A view of the base supporting the table in the up position
Base collapsed into the double berth position
Alternative coffee table top for the base
Room for four bottles of wine in the upper section of the base
I am sure it will end up doubling as a foot rest.
It was good temperate weather for working on the dinette table on Passion X so I loaded up the car with all the components and headed to the club. I first fitted the cleats to the seat fronts to support the table in the down position where it forms a double berth. The table top fitted on the cleats squarely and the base just needed to be screwed to the keel king plank structure. With the base in place and the table screwed in position to the top part of the base the next task was to position the two boxes so that the table top was level. As the boat is sitting a little stern down for heavy air performance the levels were measured off the tops of the settee seats and the two sections of the base screwed together in the up position. A few photos will make it all a little clearer.